Question: For boring operations, when would I use a ground chip-breaker vs. a molded chip-breaker? I am machining 4140 steel at 32Rc, and chip control is an issue.

Aanswer: A ground chip-breaker is recommended for chip control issues. The high-positive rake angle will help to make shorter chips, and the chip groove orientation forces the chips forward to more easily evacuate them from the bore, especially when used with high-pressure coolant through the tool.

Ground chip-breaker inserts also provide lower cutting forces, so they are better suited for deep-boring or long-reach applications, and other situations where part or tool stability may not be optimal. They are also recommended for tight-tolerance applications where stock allowance is typically light for the final size pass.